Adsense

Showing posts with label 2014 at 04:43PM. Show all posts
Showing posts with label 2014 at 04:43PM. Show all posts
On December 11th, a fully functional original Apple-1 Personal Computer will go up for auction, reports Reuters . The rare machine, which Steve Jobs sold out of his parents' garage in 1976 for $600, is expected to sell for over half a million dollars. This particular Apple-1 is the only documented machine to have been sold directly by Jobs himself.



Back in 1999, the computer was purchased by Bruce Waldack, an entrepreneur who had just sold his company DigitalNation. After Waldack's death in 2007, the Apple-1 was auctioned at a self-storage facility in Virginia, where Robert Luther purchased it, along with the original buyer's canceled check from 1976, knowing few details of its history.



ricketts_apple_1

The computer will be sold alongside that original canceled check for $600 from July 27, 1976. The check was made out to Apple Computer by Charles Ricketts, who later labeled it as "Purchased July 1976 from Steve Jobs in his parents' garage in Los Altos." A second canceled check for $193 from August of 1976 reads "Software NA Programmed by Steve Jobs August 1976." These two canceled checks were used as evidence in convincing the city of Los Altos to designate the Jobs family home on Crist Drive eligible for a listing on the National Register of Historic Places.



The Apple-1 was tested by having an expert run the standard original software program, Microsoft BASIC, along with an original Apple-1 Star Trek game.



Just a few weeks ago, the Henry Ford Museum paid $905,000 for an original working Apple-1, more than doubling the pre-sale estimate of the computer. And just last year, German auction house Breker sold two Apple-1 computers, complete with their original boxes. One sold for $330,000, while the second doubled that price to $671,400 because of the inclusion of a letter written by Steve Jobs intended for the original owner. Of the few hundred originally produced, fewer than fifty Apple-1 computers are believed to still be around today.


















applecare_plus_iconAppleCare+ for iPad, iPhone, and iPod is set to debut in Australia in the near future, perhaps ahead of the launch of the iPhone 6 in the country. According to a tipster who spoke to MacRumors, Apple Store employees in Australia are currently receiving training on the service.



AppleCare+ for iPhone originally launched in the U.S. in 2011, offering two years of extended warranty protection along with for two accidental damage incidents (with a $79 service fee).



The program expanded to include the iPad in 2012, and since then, Apple has rolled out AppleCare+ coverage in a number of countries including Canada, China, Japan, Singapore, Mexico, United Arab Emirates, and several countries across Europe.



Currently, customers in Australia are limited to standard AppleCare protection for the iPad and the iPhone, which provides two years of additional coverage but does not include accidental damage replacements. Pricing on AppleCare+ in Australia has not yet been divulged, but it will likely be similar to pricing in the United States, which is $99.


















Leaked images, mockups and schematics suggest the iPhone 6 will be Apple's thinnest iPhone model to date, with a side profile approaching that of the 6.1 mm iPod touch. A new report from Chinese media sources (Via GforGames ) suggests Apple may face yield issues with the next generation iPhone due to its decision to minimize the size of the handset.



iphone_6_ipod_touch_1

According to supply chain sources who spoke anonymously to China Times, Apple may use only one brightness enhancement film (BEF) in its LCD display as a space-saving measure. Current generation iPhone displays are supplied by Minebea and use two layers in order to improve readability in these backlit displays.



This change to a single layer technology may cause yield issues as the one layer has to be of a higher quality in order to take the place of two. To meet demand for this new part, Apple allegedly is looking to OMRON and Radiant as suppliers to supplement the projected output from Minebea.



Despite an earlier rumor that Apple was considering adopting "touch on display" technology for future iPhone models, this latest report claims Apple will continue to use the current in-cell display for its upcoming iPhone 6. Sources also claim the main suppliers for the iPhone will remain LG, JDI and Sharp, which was rumored to have been dropped from Apple's iPhone 6 supplier chain. According a report from Taiwan's Economic Daily News, Apple was said to be replacing Sharp with Innolux due to "Moire" issues with Sharp's early sample panels.



Though it won't comment on its role in future Apple products, Sharp did confirm it is betting big on Apple with an entire plant dedicated to producing displays for the Cupertino company, said Sharp Senior Executive Norikazu Hoshi in an interview with Japanese newspaper Nikkei (via CNET ). Similar to other companies that supply Apple, Sharp faces some risk in this strategy with large swings in monthly production due to Apple's once-a-year product refresh cycle.
The No. 1 plant's output goes to just one company (Apple). If you look at just this plant, it certainly presents a high level of volatility risk. But if we make LCD panels for smartphones in large quantities at the No. 2 plant, we can absorb the impact even when the No. 1 plant is not doing so well.

Sharp, Minebea and other Apple suppliers are gearing up for the expected mass production of the iPhone 6 which is rumored to begin in July. The iPhone 6 is expected to launch in September and may be available in both a 4.7-inch and 5.5-inch version.


















A model said to be an industrial prototype of the upcoming 12.9-inch "iPad Pro" has surfaced, giving a look at what the larger tablet might look like in-hand. Discovered on Chinese Twitter-like site Weibo by Nowhereelse.fr [Google Translation] the machined aluminum is said to be a reference for creating cases and other accessories.



ipadpromockup

The design of the mockup is very rudimentary and while it is said to be the iPad Pro, it is impossible to determine the exact size of the prototype from the photos. It is also not clear if this "prototype" is based on any type of legitimate specifications as Apple is said to be multiple months away from releasing a larger tablet. Along with a larger size, the model also has an Apple logo and a rear camera cutout. At 12.9-inches, the iPad Pro would be similar in size to a 13-inch MacBook Air and quite a bit larger than the existing 9.7-inch iPad Air.



12_9_ipad_macbook_air
Rendering of a 12.9-inch iPad next to a 13-inch MacBook Air



News that Apple was testing displays for a larger 12.9-inch iPad first surfaced in July of last year in a report from The Wall Street Journal . While initial rumors suggested Apple could release the device in 2014, reliable analyst Ming-Chi Kuo has pointed towards a possible 2015 launch date for the device, while Digitimes indicated in March that development on the tablet had been shelved in favor of other projects.



Rumors have suggested the iPad Pro, if released, will adopt many of the same design elements offered in the current iPad Air and Retina iPad mini, including an ultrathin chassis and narrow side bezels. It is also rumored to include an ultra high-definition display.


















Global Equities Research analyst Trip Chowdhry has made a number of outlandish predictions when it comes to Apple, and his latest claim is that Apple is preparing to enter the 3D printer market. Chowdhry shared his thoughts with Benzinga , outlining his belief that Google is pursuing a 3D printer project based on its expectations that Apple will be making a similar move.



3d_printed_apple_logo
Retro Apple Logo in 3D by arguncencen on Shapeways



Chowdhry provides little to no details on Apple's 3D printing plans, citing only the company's experience in hardware and its intellectual property covering the technology as substantiation for his prediction.
"It's either Apple or Microsoft [that inspired Google]," Chowdhry told Benzinga. "But developers feel that Apple is probably the focus for Google because Google considers Apple to be its prime competitor, not Microsoft. And Google really sees Apple to be a strong competitor, not Microsoft, because Microsoft has a lot of issues to worry about." [...]



"Apple does have intellectual property [in that space]," said Chowdhry. "And they often have more expertise in hardware development than, say, Microsoft has."

Chowdhry also points to Apple's acquisition of PrimeSense last year, with that firm's 3D sensors made famous for their role in the original Microsoft Kinect perhaps playing a role in Apple's 3D printing ambitions.



As for timing, Chowdhry doesn't specify anything for Apple but speculates that Google could announce its 3D printing intentions this June or October with product launches coming a full 12-18 months later.



As if the unsubstantiated claims and seemingly nonsensical predictions weren't enough to essentially dismiss the report as fanciful thinking, Chowdhry has a history of making grandiose claims. Freshest in many people's memories is his claim earlier this year that Apple had 60 days to introduce the iWatch or the company "will disappear" as it proves itself unable to innovate in the post-Jobs era. Chowdhry's deadline comes next Monday, with no sign of an imminent iWatch announcement.


















Adsense